Compatible command stations
LocoPilote automatically detects your command station via USB or local network. If it is not found, you set it up in a few clicks: manufacturer, model and connection.
DR5000
— YaMoRCSupportedReference command station. All features are supported. Automatic USB detection recommended.
Protocols: DCC, XpressNet, Loconet (partial)
Connection: USB / TCP network
Data rate: 62500 bps (USB) / 10 Mbit (network)
Z21
— Roco / FleischmannSupportedCompatible with the original Z21 and the Z21 Start. Network connection only. The command station’s IP address has to be configured once.
Protocols: DCC, Z21 App Protocol
Connection: Wi-Fi / Ethernet network
Data rate: 10 Mbit (network)
ECoS
— ESUComing soonSupport planned for ECoS 2 and 50210 via the ESU API.
Protocols: DCC, Motorola, ECoS API
Connection: Ethernet network
Data rate: 10 Mbit (network)
Lenz LZV100
— LenzComing soonSupport planned via LI-USB or LI101F interface (XpressNet v3.6).
Protocols: DCC, XpressNet v3.6
Connection: USB (via LI-USB)
Data rate: 9600 bps
Lenz LZV200
— LenzComing soonSupport planned: latest Lenz generation, XpressNet v4.
Protocols: DCC, XpressNet v4
Connection: USB / Network
Data rate: 19200 bps / 10 Mbit
Märklin CS3
— MärklinComing soonUnder development. API access is currently being documented by Märklin.
Protocols: DCC, Motorola, MFX
Connection: Ethernet / Wi-Fi network
Intellibox II
— UhlenbrockComing soonIntegration in progress. Loconet support planned.
Protocols: DCC, Motorola, Loconet
Connection: USB / Network
DigiKeijs DR4088
— DigiKeijsComing soonFeedback module. Support planned as a block detector.
Protocols: S88, Loconet
Connection: USB
Is your command station not in the list? Contact us — we look into every request.